SnapToSeat

Support

SnapToSeat marks you present in class. You scan the session code, photograph the marker board at the front of the room from where you are sitting, and type the four-digit code showing on screen.

Email us: hello@scantograde.com
Tell us your institution and roughly when the problem happened — that is usually enough to find it.

Checking in

  1. Enter your name and student ID. You are asked once, on first use.
  2. Tap Scan QR Code and point at the QR code on the screen at the front of the room. If it will not scan, tap Can't scan it? Enter the code and type the short code shown instead.
  3. Tap Take photo of the board and photograph the marker board from your own seat. Where you are sitting is what is being measured, so do not stand up or walk closer.
  4. Type the four-digit code showing at the front. It changes every 25 seconds.

Common problems

"Wrong or expired code"

The four-digit code changes every 25 seconds, so the usual cause is simply being a moment late. The boxes clear themselves and the phone buzzes — just enter the new code when it appears. Your board photo is kept, so you do not need to take it again.

The board photo will not upload

The photo row shows sending, then sent. If it says the upload failed, check you have signal — lecture halls are often bad for reception — and tap Retake. If your phone loses signal completely, connect to campus wifi and try again.

My seat looks wrong on the map

The position is an estimate worked out from your photo, and it is good to within a seat or two, not exact. It goes wrong most often when the whole marker board is not in the frame. Keep the whole board visible and take the photo from your seat rather than standing up — it is meant to look small from the back of a big room, and moving closer is what makes the estimate worse, not better.

The camera will not open

SnapToSeat needs camera permission to read the session code and photograph the board. Open Settings → SnapToSeat on your phone and turn Camera on. No other permission is requested, and the app never asks for your location.

I cannot scan the code from the back of the room

Pinch to zoom on the scanner screen, or use the 1× 2× 3× buttons along the bottom. The board photo screen has no zoom on purpose — zooming changes what the camera sees and would put you in the wrong seat.

I left the app and came back

If you were away more than a couple of minutes, the photo you had taken will have expired and you will be asked to take a new one. You stay in the same session; you do not need to scan the code again.

I checked in but my instructor says I am absent

Email us with your institution, the class, and the date. Your instructor controls the attendance record itself, so they may need to correct it — but we can confirm whether a check-in reached us.

Your data

No account, no password, and no location permission. What is collected and how long it is kept is set out in the privacy policy. To ask what is held about you, or to have it deleted, email hello@scantograde.com.

For instructors

If you run classes and want to use SnapToSeat, or you need answers for a privacy office or a data processing agreement, email hello@scantograde.com.